KorlaEquipment cooling water pump

Operating parameters Flow rate: 2855 m/h Head: 63.6m Speed: 1450r/min

Product Description

Operating parameters

Flow rate: 2855 m/h

Head: 63.6m

Speed: 1450r/min

Structural features

The structure is horizontal, single-stage single-suction, double vortex pump, cantilever centrifugal pump;

The pump body is radial split type, horizontal axial suction, vertical discharge;

Seen from the suction port, the pump rotates counterclockwise;

The axial force generated by the pump is mainly balanced by the balance hole, and the residual axial force is borne by a pair of angular contact ball bearings installed back to back at the driving end;

The pressure water chamber is designed as a double vortex chamber structure, which can effectively eliminate the radial force generated by the pump during operation;

The shaft seal adopts quick-loading mechanical seal, and the flushing scheme PLAN11

The static seal adopts O-ring, winding gasket or metal surface seal;

The bearing is lubricated with thin oil, no external oil supply circuit is required, and the cooling method of the bearing is air cooling.

 

ProjectUnitOperating point
Medium Demineralized water
Temperature4.3-65
Flowm³/h2855
Total liftm63.6
PowerkW630
Rated speedr/min1450
Drive device Motor